An Exploration of Operational Methods for Composite Knitted Fabrics

Nov 25, 2025

Leave a message

The production process of composite knitted fabrics involves multiple steps and material collaborations. The core of its operation lies in precisely controlling process parameters, rationally selecting equipment combinations, and strictly adhering to quality control procedures to ensure that the finished product meets expected standards in terms of structural stability, functional consistency, and appearance quality. Because this type of fabric integrates different processes such as knitting, lamination, or coating, operation must consider both material characteristics and equipment performance, forming a systematic operational standard.

In the preliminary preparation stage, the composite structure and material ratio should be clearly defined according to the product design requirements. Parameters such as the heat shrinkage rate, elastic modulus, and surface tension of different fibers or films need to be pre-assessed to avoid wrinkling, peeling, or deformation due to performance differences between layers. Simultaneously, necessary pretreatment of the greige fabric, including cleaning, pre-forming, and humidity control, can effectively improve the bonding strength of subsequent lamination. The loop density and width of the knitted greige fabric must match the design specifications to avoid affecting the lamination positioning accuracy due to dimensional deviations.

The key to the lamination process lies in the precise control of process parameters. Taking hot-press lamination as an example, temperature, pressure, and time must be set synergistically: excessively high temperatures can lead to fiber melting or fabric embrittlement, while excessively low temperatures result in weak adhesion; insufficient pressure can cause loose adhesion, while excessive pressure may damage fabric elasticity; the lamination time must ensure sufficient flow and curing of the adhesive layer or hot melt film, but excessive time will increase energy consumption and may cause substrate aging. For processes using adhesives, attention should be paid to coating uniformity and adhesive volume control to prevent local accumulation that could reduce breathability or harden the hand feel. If multi-layered heterogeneous material lamination is involved, a small-scale trial should be conducted first to verify the interlayer shrinkage matching and functional integrity before mass production.

The connection between knitting and lamination processes also requires attention to synchronization. In multi-needle or seamless knitting equipment, the lamination trajectory and needle logic can be pre-set so that the fabric completes part of the lamination task during the knitting process, reducing secondary positioning errors. Operators should monitor the coil forming status and lamination interface position in real time, and immediately adjust the feeding speed and draft ratio if any deviation or abnormal tension is detected to ensure the overall structural flatness.

Quality inspection is conducted throughout the entire process. Online testing should cover indicators such as width, thickness, interlayer peel strength, and surface defects, while offline testing should include color fastness, functionality (such as waterproofing, breathability, and elastic recovery), and durability testing. When abnormal data occurs, the corresponding process should be traced back to analyze the cause. Common factors include fluctuations in material moisture content, unstable equipment temperature control, or adhesive mixing ratio deviations, and the operating procedure should be corrected promptly.

In summary, the operation method for composite knitted fabrics emphasizes the scientific nature of the initial design, the refinement of process parameters, and closed-loop quality management throughout the entire process. Only by continuously optimizing the operating procedures while strictly adhering to process discipline can high-performance and high-reliability products be consistently produced to meet the increasing application demands of various fields for composite knitted fabrics.

Send Inquiry